Stock Category
|
Radial insert ball bearings are based on sealed deep groove ball bearings, but have a convex outer ring and in most cases an extended inner ring with a certain locking device enabling quick and easy mounting onto the shaft.
These bearings are available singly or as units, consist of a housing, bearing and seal that is preassembled and greased. These ready-to-mount units can accommodate moderate initial misalignment, but normally do not enable axial displacement of the shaft.
These bearings and units provide a simple, cost-effective solution that can provide a number of benefits.
|
| designation | Principal dimensions | weight | brand | ||
|---|---|---|---|---|---|
| d | D | B | w | ||
| _ | mm | kg | _ | ||
| GSH25-2RSR-B | 25 | 52 | 28 | 0.17 | 25×52×28INA |
| GSH30-2RSR-B | 30 | 62 | 32 | 0.27 | 30×62×32INA |
| GSH35-2RSR-B | 35 | 72 | 34 | 0.43 | 35×72×34INA |
| GSH40-2RSR-B | 40 | 80 | 38 | 0.54 | 40×80×38INA |
| GSH50-2RSR-B | 50 | 90 | 40 | 0.64 | 50×90×40INA |
| 201-NPP-B | 12 | 32 | 10 | 0.04 | 12×32×10INA |
| 203-NPP-B | 17 | 40 | 12 | 0.06 | 17×40×12INA |
| 204-NPP-B | 20 | 47 | 14 | 0.11 | 20×47×14INA |
| 205-NPP-B | 25 | 52 | 15 | 0.13 | 25×52×15INA |
| 206-NPP-B | 30 | 62 | 16 | 0.2 | 30×62×16INA |
| 207-NPP-B | 35 | 72 | 17 | 0.29 | 35×72×17INA |
| 208-NPP-B | 40 | 80 | 18 | 0.37 | 40×80×18INA |
| 209-NPP-B | 45 | 85 | 19 | 0.41 | 45×85×19INA |
| 210-NPP-B | 50 | 90 | 20 | 0.46 | 50×90×20INA |
| SKE17-204-KRR-B | 17 | 47 | 17.7 | 0.12 | 17×47×17.7INA |
| SK014-205-KRR-B | 22.225 | 52 | 25.4 | 0.2 | 22.225×52×25.4INA |
| SK100-206-KRR-B-AH11 | 25.4 | 62 | 24 | 0.32 | 25.4×62×24INA |
| SK102-207-KRR-B-AH10 | 28.575 | 72 | 37.7 | 0.45 | 28.575×72×37.7INA |
| SK104-207-KRR-B-AH12 | 31.75 | 72 | 25 | 0.45 | 31.75×72×25INA |
| GVK100-208-KTT-B-AS2/V | 25.4 | 80 | 36.5 | 0.74 | 25.4×80×36.5INA |
| GVK102-208-KTT-B-AH10-AS2/V | 28.575 | 80 | 36.5 | 0.68 | 28.575×80×36.5INA |
| GVK104-209-KTT-B-AS2/V | 31.75 | 85 | 36.5 | 0.71 | 31.75×85×36.5INA |
| GVK109-211-KTT-B-AS2/V | 39.6875 | 100 | 36 | 1.25 | 39.6875×100×36INA |
| VK100-208-KTT-B-AH10 | 25.4 | 80 | 36.5 | 0.72 | 25.4×80×36.5INA |
| RAE12-NPP-FA106 | 12 | 40 | 28.6 | 0.13 | 12×40×28.6INA |
| RAE15-NPP-FA106 | 15 | 40 | 28.6 | 0.12 | 15×40×28.6INA |
| RAE17-NPP-FA106 | 17 | 40 | 28.6 | 0.11 | 17×40×28.6INA |
| RAE20-NPP-FA106 | 20 | 47 | 31 | 0.17 | 20×47×31INA |
| RAE25-NPP-FA106 | 25 | 52 | 31 | 0.2 | 25×52×31INA |
| RAE30-NPP-FA106 | 30 | 62 | 35.8 | 0.33 | 30×62×35.8INA |