Stock Category
Angular contact ball bearings have raceways in the inner and outer rings that are displaced relative to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
|
designation | Principal dimensions | weight | brand | ||
---|---|---|---|---|---|
d | D | B | w | ||
_ | mm | kg | _ | ||
3207 A-2ZTN9/MT33 * | 35 | 72 | 27 | 0.44 | 35×72×27 |
3307 DJ1 | 35 | 80 | 34.9 | 0.79 | 35×80×34,9 |
3307 A * | 35 | 80 | 34.9 | 0.71 | 35×80×34,9 |
3307 A-2RS1TN9/MT33 * | 35 | 80 | 34.9 | 0.73 | 35×80×34,9 |
3307 A-2ZTN9/MT33 * | 35 | 80 | 34.9 | 0.73 | 35×80×34,9 |
3307 ATN9 * | 35 | 80 | 34.9 | 0.71 | 35×80×34,9 |
3208 A-2ZTN9/MT33 * | 40 | 80 | 30.2 | 0.57 | 40×80×30,2 |
3208 A-2RS1TN9/MT33 * | 40 | 80 | 30.2 | 0.57 | 40×80×30,2 |
3208 A * | 40 | 80 | 30.2 | 0.58 | 40×80×30,2 |
3208 ATN9 * | 40 | 80 | 30.2 | 0.58 | 40×80×30,2 |
3308 DTN9 | 40 | 90 | 36.5 | 1.05 | 40×90×36,5 |
3308 DNRCBM | 40 | 90 | 36.5 | 1.2 | 40×90×36,5 |
3308 DMA | 40 | 90 | 36.5 | 1.15 | 40×90×36,5 |
3308 A * | 40 | 90 | 36.5 | 1.05 | 40×90×36,5 |
3308 A-2ZTN9/MT33 * | 40 | 90 | 36.5 | 0.93 | 40×90×36,5 |
3308 A-2RS1TN9/MT33 * | 40 | 90 | 36.5 | 0.93 | 40×90×36,5 |
3308 ATN9 * | 40 | 90 | 36.5 | 1.05 | 40×90×36,5 |
3209 A-2ZTN9/MT33 * | 45 | 85 | 30.2 | 0.63 | 45×85×30,2 |
3209 A-2RS1TN9/MT33 * | 45 | 85 | 30.2 | 0.63 | 45×85×30,2 |
3209 A * | 45 | 85 | 30.2 | 0.64 | 45×85×30,2 |
3209 ATN9 * | 45 | 85 | 30.2 | 0.63 | 45×85×30,2 |
3309 DNRCBM | 45 | 100 | 39.7 | 1.5 | 45×100×39,7 |
3309 DMA | 45 | 100 | 39.7 | 1.6 | 45×100×39,7 |
3309 A * | 45 | 100 | 39.7 | 1.4 | 45×100×39,7 |
3309 ATN9 * | 45 | 100 | 39.7 | 1.4 | 45×100×39,7 |
3210 A-2ZTN9/MT33 * | 50 | 90 | 30.2 | 0.65 | 50×90×30,2 |
3210 A-2RS1TN9/MT33 * | 50 | 90 | 30.2 | 0.65 | 50×90×30,2 |
3210 A * | 50 | 90 | 30.2 | 0.66 | 50×90×30,2 |
3210 ATN9 * | 50 | 90 | 30.2 | 0.66 | 50×90×30,2 |
3310 DNRCBM | 50 | 110 | 44.4 | 1.95 | 50×110×44,4 |