Stock Category
|
Angular contact ball bearings have raceways in the inner and outer rings that are displaced relative to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
|
| designation | Principal dimensions | weight | brand | ||
|---|---|---|---|---|---|
| d | D | B | w | ||
| _ | mm | kg | _ | ||
| 3310 DMA | 50 | 110 | 44.4 | 2.15 | 50×110×44,4 |
| 3310 A * | 50 | 110 | 44.4 | 1.95 | 50×110×44,4 |
| 3310 ATN9 * | 50 | 110 | 44.4 | 1.95 | 50×110×44,4 |
| 3211 A * | 55 | 100 | 33.3 | 1.05 | 55×100×33,3 |
| 3211 ATN9 * | 55 | 100 | 33.3 | 1.05 | 55×100×33,3 |
| 3311 DNRCBM | 55 | 120 | 49.2 | 2.55 | 55×120×49,2 |
| 3311 DMA | 55 | 120 | 49.2 | 2.8 | 55×120×49,2 |
| 3311 A * | 55 | 120 | 49.2 | 2.55 | 55×120×49,2 |
| 3311 ATN9 * | 55 | 120 | 49.2 | 2.55 | 55×120×49,2 |
| 3212 A-2RS1TN9/MT33 * | 60 | 110 | 36.5 | 1.4 | 60×110×36,5 |
| 3212 A * | 60 | 110 | 36.5 | 1.4 | 60×110×36,5 |
| 3212 ATN9 * | 60 | 110 | 36.5 | 1.4 | 60×110×36,5 |
| 3312 A * | 60 | 130 | 54 | 3.25 | 60×130×54 |
| 3213 A | 65 | 120 | 38.1 | 1.75 | 65×120×38,1 |
| 3313 DNRCBM | 65 | 140 | 58.7 | 4 | 65×140×58,7 |
| 3313 A * | 65 | 140 | 58.7 | 4.1 | 65×140×58,7 |
| 3214 A | 70 | 125 | 39.7 | 1.9 | 70×125×39,7 |
| 3314 A * | 70 | 150 | 63.5 | 5.05 | 70×150×63,5 |
| 3215 A | 75 | 130 | 41.3 | 2.1 | 75×130×41,3 |
| 3315 A * | 75 | 160 | 68.3 | 5.55 | 75×160×68,3 |
| 3216 A | 80 | 140 | 44.4 | 2.65 | 80×140×44,4 |
| 3316 A | 80 | 170 | 68.3 | 6.8 | 80×170×68,3 |
| 3217 A | 85 | 150 | 49.2 | 3.4 | 85×150×49,2 |
| 3317 A | 85 | 180 | 73 | 8.3 | 85×180×73 |
| 3218 A | 90 | 160 | 52.4 | 4.15 | 90×160×52,4 |
| 3318 DMA | 90 | 190 | 73 | 10 | 90×190×73 |
| 3318 A | 90 | 190 | 73 | 9.25 | 90×190×73 |
| 3219 A | 95 | 170 | 55.6 | 5 | 95×170×55,6 |
| 3319 A | 95 | 200 | 77.8 | 11 | 95×200×77,8 |
| 3220 A | 100 | 180 | 60.3 | 6.1 | 100×180×60,3 |